HOME > COUSINS > Turntable - Semi Automatic >

Cousins HP 1100-S Stretch Wrap Machine
Cousins HP 1100-S Stretch Wrap Machine
 
Cousins Part# HP-1100-S

5000lb capacity, the HP 1100X is forklift accessible only. The 1100 series machines have an electro-mechanical braking system to apply force to load to the stretch film. They do not have a pre-stretch carriage.

In order to help you purchase the very best product for your application, and obtain the lowest pricing and shipping rates to your location, we recommend that you call us at 888.998.8766 and speak with one of our equipment technicians.

It is important to us that you receive the best solution at the best price.


Product Code: CHP-1100-S
 

Additional Information
 

Production Speed
  • 1-30 loads per hour (Single Turntable)
  • NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
Load Capacity
  • Maximum load weight: 4,000 lbs dynamic - 10,000 lbs static
  • Maximum load size: 56" W x 56" L (79" max. load diagonal) x 75" H (plus up to 4" top overlap)
Turntable
  • 48" octagonal 5/16" thick formed steel plate turntable
  • 4 point caster support system
  • Turntable height less than 11" from floor
  • ANSI # 50 direct chain drive c/w chain tensioner
  • 3-12 RPM rotational speed c/w soft start acceleration
  • 1/2 HP AC variable speed motor
  • Final revolution deceleration and positive stop alignment
  • Front and back forklift ports for easy movement
  • Accu-Count exact turntable positioning system for additional film savings!
Film Carriage Elevator
  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
  • Maintenance free carriage guidance system
Film Delivery System
  • Stretch roller with manually adjusted caliper brake web tensioning system
  • Standard 20” roll width, 10” diameter
  • Carriage Descent Obstruction Safety Shut-Off Device
  • Side mounted film carriage for operator convenience and safety
Film Capacity
  • Accepts all commercial films wound on 3" diameter cores x 20" width
  • Accommodates damaged cores
Electrical Input Requirements
  • 115 Volts 1 Phase 60 Hz 10 Amps
Control Features
  • Electronic controls with LCD operator interface
  • Power Off – On – Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Base or Top Wraps First program
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Separate film carriage raise & lower speed controls
  • Operator programmable turntable speed control
  • Triple beam automatic load height detection sensor for dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program
Structural Features
  • All structural steel construction
  • Forklift truck portable base structure design - lifting tubes included for front and rear access
  • Structural steel tube machine tower with sheet metal covers
  • Electro-static powder coated paint finish

Share your knowledge of this product. Be the first to write a review »