HOME > TACH-IT > Tape Dispensers and Applicators >

Tach-It Z-Cut 5 Definite Length Random Tape Dispenser
Tach-It Z-Cut 5 Definite Length Random Tape Dispenser
 
Designed for continuous high productivity industrial applications, the Tach-It Z-Cut 5 Heavy Duty Definite Length Tape Dispenser is able to feed and cut the hardest types of tapes to dispense including vinyl, duct, and carpet tapes.

The Z-Cut 5 is easy to use, with a dial to control the tape length and an easy to read LED. Our Z-Cut 5 utilizes our exclusive tri-mode automatic setting feature, which allows the operator to feed and cut the tape to a random length, to have pieces of tape dispensed, and cut to a pre-determined tape by pressing a button or have the tape dispensed as the previous piece of tape is removed.

Able to feed tape lengths from 2 inches to 51 inches, the Z-Cut 5 has durable all steel construction, is easy to load, requires no operator training and has a large 7 1/2 inch tape roll capacity.

SEE VIDEO BELOW



Product Code: TI-ZCUT5
Quantity:

Additional Information VIDEO Demonstration
 
Features:
  • Semi-Automatic Definite Length Tape Dispenser for hard to cut tapes.
  • Works on heavy tapes such as duct tape, vinyl tapes, filament tapes, carpet tapes and double coated tapes.
  • Feeds both random and pre-determined lengths of tape.
  • Can cut tapes from 2 inch to 51 inches long.
  • Has 3 modes - 1 random mode and 2 automatic modes.
  • Easy to use LED and push button controls.
  • Small table top design.
  • Machine Length - 10 3/4 inch, Width - 6 1/4 inch, Height - 8 inch
  • Machine Weight: 13 1/2 Lbs
  • Tape Width: Maximum - 3 inch, Minimum - 5/8 inch
  • Tape Length: Maximum - 51 inch, Minimum - 2 inch
  • Core Size: 3 inch
  • Maximum Tape Roll Diameter: 7 1/2 inch
  • Power 110 Volt 60 Hz 1 Phase 50 VA (230 V 50 HZ 1 Phase 50 VA available.)

Share your knowledge of this product. Be the first to write a review »