Loveshaw CF-5AF Case Erector | Case Forming Machine

HOME > LOVESHAW > Case Formers >

Loveshaw CF-5AF Little David Case Former/Packing Station

This economical semi-automatic case former has an ergonomic design, accommodates a wide range of boxes, and is approximately 40% less than our CF-5 case former. The CF-5AF requires no adjustment as you change case sizes.

Once the box is formed, it is held in place to allow the operator to pack the product into the case. The full case can then be pushed into virtually any case sealer for top and bottom sealing. Pair it with our LDX-RTB random case sealer as an ideal form, pack and seal solution for goods-to-person order fulfillment or frequent box changeover application.

In order to help you purchase the very best product for your application, and obtain the lowest pricing and shipping rates to your location, we recommend that you call us at 888.998.8766 and speak with one of our equipment technicians.

It is important to us that you receive the best solution at the best price.

SEE VIDEO BELOW

CALL US FOR A BETTER PRICE! WE WILL NOT BE BEAT!

Product Code: CF-5AF

Additional Information

VIDEO Demonstration

Features:

Heavy duty construction
Can be operated on either side
Pneumatically controlled sequence
Attaches to any Little David Case Sealer
Nema 4
Minimal air requirements
Plug in operation

Power Requirements: 110 VAC, 60Hz, single phase, 1 Amp

Note: Other voltages available. Contact Loveshaw for details.

Air Requirements: 0.1 SCFM @ 80 psi

Production Rate: Up to 9 cases per minute, depending on operator dexterity

Case Dimensions

Length: 6" - 26" (152.4mm - 711.2mm)
Width: 6" - 22" (101.6mm - 558.8mm)
Height: 3" - infinite (76.2mm - infinite)