Production Speed:

• 1-35 loads per hour
• NOTE: Process rates will vary with load size, number of wraps & load/unload time

Load Capacity:

• Maximum load weight: Unlimited (floor supported)
• Maximum load size: 50" W x 50" L (71" max. load diagonal) x 86" H (plus up to 4" top overlap)
• Minimum load size: 24" W x 24" L x 24" H

Rotary Arm:

• Double flange bearing support system
• Twin V-belt drive pulleys with belt tensioner
• 1-12 RPM rotational speed c/w soft start acceleration
• Final revolution deceleration and positive stop alignment
• 1/2 HP DC variable speed motor

Film Carriage Elevator:

• 1/2 HP DC variable speed motor
• Direct flat belt drive system
• Maintenance free 12 point carriage guidance system

Film Delivery System:

• Super Rapid Thread™ 20" capacity pre-stretch carriage
• with Patent Pending pressure balanced nip roller system
• 1/2 HP DC variable speed motor
• Fully electronic dynamic dancer corner compensation
• 33 to 313% fixed stretch capability
• Pre-stretch ratio variable by easy sprocket change
• Rapid Thread™ Safety Door with auto power cut-off
• switch

Structural Features:

• All structural steel construction
• Integral structural steel wall/floor mounting stand
• Electro-static powder coated paint finish

Safety Features:

• Rotary Arm Obstruction Emergency Safety Stop
• Sensor

Control Features:

• PANASONIC PLC with Touchscreen Operator Interface
• Power Off " On " Reset Switch & Power On indicator
• light
• Single button Auto Wrap Cycle Start/Pause
• Cycle Pause for applying top sheets
• Reinforce Wrap control for mid-wrapping
• Emergency Stop button
• Rotary Arm Jog button
• Film Carriage Lower/Raise buttons
• Film Clamp Open/Close button
• Film tension (Force-to-Load) control
• Separate film carriage raise & lower speed controls
• Variable rotary arm speed control
• Triple beam auto load height sensing photo-eye, detects
• dark or shiny loads
• Separate 1 to 12 revolution top & bottom wrap control
• Selectable Reduced Bottom Film Force parameter for
• wrapping bottom of load
• A " B " C Wrap Program selector with capability to input
• and store unique wrapping parameters for each program
• Pendant Start/Stop push-button station for remote
• operator control " optional lanyard or wireless remote
• control available
• Stack-light beacon indicates run, clear or fault conditions
• Rotary arm and film carriage elevator dynamic braking
• NEMA 12 control panel and junction boxes
• Dust tight slip ring assembly
• Non-proprietary UL/CSA approved components

Automation Features:

• "All Electric " No Pneumatics Required"
• Electro-mechanically actuated film clamp mechanism
• Electro-mechanically actuated film tail cut/wipe arm
• mechanism
• Ni-chrome impulse hot wire film cut off c/w automatic
• periodic cleaning cycle

Electrical Requirement:

• 115 Volts 1 Phase 60 Hz 15 Amps